Franke SMART GN 86 M H BK, Installation And User Manual

Page: 12 / 128

– 12 –
GN 86 M H XS / GN 86 M H BK / GN 86 M H WH
EN
It is an electronic timing module enabling your
food you have put in the oven to be ready for
service at any time you like. The only thing you
need to do is to programme the cooking time
of the food and also the time when you would
like your food to be ready.
It is also possible to use a minute-programmed
alarm clock independent from the oven.
The case where the time clock is behind or
ahead is not a malfunction. The oven time
clock may be put back or ahead according to
mains frequency as it runs directly with mains
voltage. This is not a malfunction.
Power on
At power on, oven is inactive, time of day and
symbols are flashing.
„ „ The indicated time of day is not correct
and has to be adjusted.
Z X Press to activate the oven and proceed
adjusting the time of day as below.
Time of day adjustment
Time of Day adjustment is only possible when
no cooking program is in progress.
Z X
Press and simultaneously for
3 seconds to enter the adjustment mode
and then the dot symbol in between
hours and minutes digits will start to
flash. Using either and adjust the
desired duration. The maximum adjustable
duration is 23h 59 minutes.
Adjustment mode will be abandoned within
6 seconds after the last button press or
can be terminated immediately by pressing
the button.
Note:
Time of Day adjustment is also activated
in first 7 seconds after power on.
Setting the minute minder
With this function, you can adjust a duration in
minutes.
„ „ After the adjusted time has been elapsed,
an alarm sound will be produced.
Z X Press button once to enter the minute
minder adjustment mode, symbol will
start flashing on the screen.
Z X
Using either or , adjust the desired
duration. The maximum adjustable
duration is 10 hour. Adjustment mode will
be abandoned within 6 seconds after the
last button press or can be terminated
immediately by pressing the button.
Cancelling the alarm buzzer sound
„ „
Once the adjusted minute minder
duration is elapsed, the buzzer alarm
will start to sound, accompanied by
the flashing symbol on the screen.
„ „
Any button press will stop the alarm
sound and this indication.
„ „
If no button is pressed, the alarm sound
will end automatically after 5 minutes,
but the flashing symbol will go on.
Semi automatic cooking
This cooking program is intented to start
cooking immediately for a specified duration.
After the oven is set to the desired function
and Temperature via the oven knobs:
Z X
Press the button twice, symbol will
flash on the screen. and duration
of cooking will show on the screen one
after another.
Z X
Using or buttons, adjust the desired
cooking duration.
Z X
After 6 seconds of the last button press
or by pressing twice, the adjustment
is completed. will be steady on the
screen and the display shows the current
time of day.
Full automatic cooking
This cooking program is intented to perform
a delayed cooking by programming the time of
day, when the food should be ready.
In other words, the oven will start cooking not
immediately but will automatically calculate the
time to start cooking.
Z X
Perform step 1 and 2 of the semi auto
cooking as above.
(cooking duration adjustment).
Z X
Press button once again, symbol
will flash on the screen and duration
of cooking will show on the screen one
after another.