HWSS2321W-00
01/22
HWSS2321W-00
| Medizmi102218 | V15
4
3
3
MOUNT SINK
Hang sink onto wall brackets
and level the sink by eye. (Final
levelling will take place after water
flow is activated.
4
4
INSTALL THE WASTE FITTING INTO THE SINK.
a. Disassemble the waste fitting.
b. Slide the waste body and upper gasket into the sink hole.
c. Thread the lock nut onto the body.
d. Tighten into place.
e. Insert the tailpiece into the tailpiece nut.
f. Insert the tailpiece gasket into the tail
g. Tighten the tailpiece assembly onto the waste body.
h. Connect a standard p-trap (provided by others). The amount of space is limited to install the shroud. We recommend a 1 piece
tubular trap without a cleanout plug on the bottom the trap.
5
5
ELECTRICAL CONNECTIONS
Check local codes for compliance prior to making any electrical connections.
The water tight fittings have an alignment feature. Gently push the fittings together rotating until they engage. Little to no force
should be required to do so. Once fitted together, lock together by threading the locking rings.
The connections are colour coded.
a. Connect the blue banded wires together (electrolytic generator)
b. Connect the yellow banded wires together (IR sensor)
c. Connect the red banded wires together (water LED)
d. Plug in the transformer to the black wire and plug into the GFI receptacle.
e. Optional battery backup AT00-024 (white banded) cable
EN
