HWSS2321W-00
01/22
HWSS2321W-00
| Medizmi102218 | V15
2
PREFACE
Electrochemical water disinfection a safe and effective way to help sanitize the sink and help keep the drain and trap free of
CPOs & other pathogens. During use and at periodic intervals, an electrolytic process occurs which reconstitutes the water
molecules into mixed oxidants which are hostile to bacteria. No chemicals or consumables are added or used during this
process. During use this electrolyzed water will flood the drain and aid in cleaning and disinfection. Please note this process
is intended to augment (not replace) current cleaning or infection control protocols at the facility.
Other features include a standard 20 second lathering timer and a post-wash cycle of 3 seconds of water runtime which
helps wash all residue down into the sink drain. A daily purge cycle is also standard to help prevent stagnant water in the
lines, maintain outlet temperatures and ensure continuous waste treatment. Medi-flo is designed for hand washing only
and is not to be used as a drinking source, to wash instruments or bedpans etc. Recommended for areas with normal water
conductivity above 75 TDS (total dissolved solids). If unaware of your local water conductivity, please contact customer
service and this can easily be determined for you before you install the product.
Medi-flo is recommended to be installed with a thermostatic mixing valve and set to a temperature of 27-38C. (Optional
accessory MEDI-MIX is available from Franke.) Franke Medi-flo sink is designed to install on provided wall hanger brackets. If
mounting on a wall that cannot support the load, we recommend the use of our FRANKE in-wall carrier IWC2104.
15 1/4 [387 mm]
31 9/16 [801 mm]
*
32 13/16 [833 mm]
*
2 [51 mm]
4 [102 mm]
Hot and Cold Supply Lines
Wall Hanger Brackets (2)
Secure to front of finished wall.
4 15/16 [125 mm]
Finished
Wall
Finished Floor
Integral
Carrier
Rough-in
Box
Notes:
1. * Yields a finished rim height of 33" (832mm)
2. Recommended carrier FRANKE IWC2104
1 3/4" (45mm) out
from finished wall
2 7/8 [73 mm]
Optional Thermostatic Mixing Valve
(MEDI-MIX)
Electronic Solenoid
Shroud Mount
EN
