11/19
| OZO-FLO Troubleshooting Guide
Franke Kindred Canada Limited
1000 Franke Kindred Road
Midland, ON L4R 4K9
Tel 1.855.446.5663 (CANADA)
Tel 1.855.526.0503 (USA)
www.franke-commercial.com
[email protected] (Canada)
[email protected] (USA)
Water stops flowing out when washing hands
a. If while washing hands the water seems to stop from time to time,
the sensor range should be increased. Using handheld program-
mer AC01-005 increase the sensor range.
Water does not shut off
If water does not shut off, try the following:
a. Ensure that nothing is not in front of the sensor. If so remove and
test.
b. Even with debris in front of the sensor, the water flow should
cease after 1 minute as part of the anti-vandal features. If water
continues to run, cycle the power on and off by unplugging the
transformer. When the faucet is first plugged in, the system will
send a pulse to the plug in transformer to close.
c. If the water continues to run, try activating the faucet. If the fau-
cet shuts off momentarily, this means that the latching solenoid
valve is reversed. Reverse the spade connectors so that the
brown wire is closest to the wall. Cycle power again to see if this
solves the issue.
d. If water continues to run, replace solenoid valve with AC17-104-
6V.
Appendix 1 : Parts Breakdown
ZGI_001_2030052737-Ozo-flo-Appendix.pdf
