14
Heat Up Rapidly: Sometimes it is desired to bring the oven temperature rapidly to
the adjusted value. Touching will energize the circular resistance and/or turbo fan
temporarily to achieve a rapid heat up. symbol will be visible on the screen, after
reaching the adjusted oven temperature, it will vanish and a buzzer tone is heard.
Note: Rapid heat up is not allowed for some functions (grill) or when the actual
temperature is less than 50C away from the adjusted one or the adjusted
temperature is below 100 C.
Child Lock:
Child lock can be activated or deactivated via touching the
key for 1
second, until the
symbol appears on the screen. When child lock is activated, no
key except , is accepted.
Minute Minder Alarm:
Touch and release
key until
appears in a flashing manner. Give in the
time in minutes, using the or keys. Flashing will stop after 7 seconds, a buzzer
alarm lasting 7 minutes will be produced after the adjusted time has elapsed. This
alarm can be stopped touching any of or keys.
Alarm Clock:
Touch and release
key until
appears in a flashing manner. Give in the
alarm time , using the or keys. Flashing will stop after 7 seconds, a buzzer
alarm will be produced when the adjusted time has come. This alarm can be stopped
touching any of or keys.
ERROR INDICATIONS:
When situations which prevent normal operation occur, the device enters error
mode. Device is in the standby status but an error code is displayed on Time of Day
Display. Even if the error recovers, this code will remain on the display until
key
is touched. A total number of 8 error codes exist:
Err1: Communication error
Err2: PT1000 open circuit
Err3: PT1000 short circuit
Err4: Temperature exceed in user interface
Err5: Temperature exceed in the power module.
Err6: Temperature sensor failure in the user interface.
Err7: Temperature sensor failure in the power module.
Err8: Main power error. There is no warm up detected although heating
elements seem to be activated.
