Franke DM74MXS 5600114, Handbook

Page: 16 / 28

16
The end cooking time clock rustic
The figure illustrates the programmer controls; knobs 1 (L/H) and 2 (R/ H) allow for all the necessary adjustments to
be made.
Knob 1
Use this knob to set the correct time. To do this, pull and turn the knob clockwise until the correct time is displayed.
Knob 2
Use this knob to set the cooking time or to programme the oven for manual use. To do this, turn the knob clockwise.
Manual operation of the oven
The oven can also be used manually, i.e. without any programming. In this case, turn knob 2 of the programmer
clockwise until the symbol corresponds with the marker on the control knob.
Semi-automatic operation of the oven
Normal cooking start with programmed cooking end:
prepare your dish; turn knob 2 clockwise and set the expected minutes forthe end cooking time on the dial (Q); turn the selector knob to the
chosen setting and the thermostat knob to the desired temperature. The oven starts immediately. When the set amount of time is up, in
addition to the timer ringing, the oven is automatically turned off. To silence the buzzer, turn the clock back to "0" or manual mode by turning
knob 2. N.B.Straight after it is turned off, and for a prolonged period of time, the interior of the oven maintains a temperature close to that set
for cooking; so, to avoid overcooking or burning food, we recommend you remove it from the oven as soon as cooking is complete.
Minute minder
The clock may be used as a minute minder only if the oven is not in operation. To operate the minute minder, turn knob 2 clockwise until the
desired time is displayed on the dial (Q). The maximum amount of time that can be set is 180 minutes. To silence the buzzer, turn knob 2
clockwise until the symbol In this case, turn knob 2 "0" corresponds with the marker on the control knob.
Important
To use the oven in manual mode, (i.e. without any programming), the following steps are necessary:
• Turn knob 2 of the programmer clockwise until the symbol corresponds with the marker on the control knob.