Franke DM74MXS 5600114, Handbook

Page: 25 / 28

25
Assembly instructions
Measure the width of the back panel (S) of the cabinet, which should usually be 16,18 or 20 mm. 16 mm back panel: place 2 tabs (T)
indicating the number 16 on each fastening bracket (F). 18mm back panel: place 2 tabs (T) indicating the number 18 on each
fastening bracket (F). 20 mm back panel: no tabs are necessary for the 20 mm thick back panel. Position the brackets (F), resting
them onto the cabinet back panel and at the bottom on the oven supporting plane.
Secure the brackets (F) in place using the screws (V). Fit the oven inside the cabinet, open the oven door completely and secure it to
the brackets (F) using the 4 screws (v) and the 4 plastic spacers (D).