Franke 116.0574.897, Installation And User Manual

Page: 14 / 140

FMO 45 GN 81 / FMO 45 GN 86
– 14 –
EN
Semi automatic cooking
This cooking program is intented to start
cooking immediately for a specified duration.
After the oven is set to the desired function
and Temperature via the oven knobs:
Z X
Press the button twice, symbol
will flash on the screen and
duration of cooking will show on the screen
one after another.
Z X
Using or buttons, adjust the desired
cooking duration.
Z X
After 6 seconds of the last button push
or by pressing twice, the adjustment
is completed. will be steady on
the screen and the display shows
the current time of day.
Full automatic cooking
This cooking program is intented to perform
a delayed cooking by programming the time
of day, when the food should be ready.
in other words, the oven will start cooking not
immediately but will automatically calculate
the time to start cooking.
Z X
Perform step 1 and 2 of the semi auto
cooking as above (cooking
duration adjustment).
Z X
Press button once again, symbol
will flash on the screen and duration
of cooking will show on the screen one
after another.
Z X
Using or buttons, adjust the desired
end of cooking time. symbol will
disappear but symbol will be still
flashing on the screen. This indicates that
an automatic cooking is programmed but
cooking has not started yet.
Z X
After 6 seconds of the last button push
or by pressing , the adjustment
will be completed, the display shows
the current time of day.
Auto cooking end
After the automatic cooking has been
completed, symbol will be flashing on
the screen and the buzzer alarm will sound.
Any button press will stop the alarm sound but
the flashing symbol will go on till button
is pressed. the buzzer alarm will sound for
7 minutes if not stopped.
Power interrupts
„ „
After any interrupt of mains power, your
oven will be inactive after the power
is restored, for safety reasons.
„ „
After power on, the time digits and
symbol will flash and the time has
to be adjusted.
Note: the flashing symbol indicates that
the oven is inactive and you have to enter
the manual mode.
Child lock
This function is intented to prevent any
unauthorized modification of the timer settings.
„ „ This function will be active, within
30 seconds after the last button press.
will appear.
„ „ To deactive it, press the button for
3 seconds. will disappear.
Programmable options
Alarm tone
„ „
Pressing and holding the button for
3 seconds will result in the currenly
valid buzzer tone being produced.
„ „
By pressing and buttons, you
may scroll through 3 available
buzzer tones.
„ „
The last heard buzzer tone will
be automatically recorded as the
selected tone.
„ „
After 6 seconds of the last button push
or by pressing ,
the adjustment is completed.
Brightness setting
Pressing and holding the button for
3 seconds will result in the currenly valid
brightness setting being showed. By pressing
and buttons, you may scroll through
8 available brightness setting. The last seen
brightness setting will be automatically
recorded as the selected setting.
„ „ After 6 seconds of the last button push
or by pressing , the adjustment
is completed.
Note:
Default settings are highest.
Note: Programmable options are nonvolatile
and will be resident after any power failure.