– 12 –
EN
During duration or end time adjustment mode
selection, the corresponding
Auto
symbol
flashes.
Once a programme duration is set, the end
time cannot be decreased. Likewise, the
duration of a programme cannot be prolonged
once the end time is set.
Programme run
When the automatic programme is in progress
(and therefore the cooking function is active),
the
Auto
symbol remains lit and the remaining
cooking time appears on the display in
countdown form. The symbol also remains lit.
Automatic programme end
At the end of the programme duration or when
the end time is reached, the corresponding
symbol goes off.
At the end of the automatic programme, the
Auto
symbol flashes, the display shows “End”
and an intermittent acoustic signal (which can
be stopped by pressing any button) sounds.
Timer function
The timer allows the setting of a time from which a
countdown begins. This function does not turn the
oven on or off, but only sounds an audible alarm
when the time has elapsed.
X
X
Press the Mode or Set button once; the display
shows:
The bell symbol flashes, then the alarm
duration can be set with the + and – buttons.
When this function is active, the bell symbol
remains lit and the display shows the remaining
time (countdown).
At the end of the time an acoustic signal
(which can be stopped by pressing any button)
sounds.
Modifying/deleting data
X
X
The set data can be changed at any time by
pressing the + and - buttons together.
Cancelling the cooking duration automatically
ends the function, and vice versa.
In case of programmed operation, the
appliance will not accept end of cooking times
prior to those of start of cooking proposed by
the appliance itself.
Note:
The oven stays hot at around the set cooking
temperature for a long time after it has been
switched off; therefore to avoid overcooking or
burning the food, it is advisable to remove it from
the oven.
Switching on the first time
X
X
When using the oven for the first time, operate it
empty with the temperature knob set to maximum
for at least 40 minutes, keeping the door
completely closed and airing the room.
The odour noticed during this operation is
due to the evaporation of substances used to
protect the oven during the period between
manufacture and installation.
After the 40 minutes, the oven stops
automatically and will be ready for use after
cooling down the oven.
Suggestions
X
Z
For successful cooking, never place your dishes in
the oven when it is cold; wait until it has reached
the set temperature.
X
Z
During cooking, never place pots or containers
directly on the oven floor;
9
place them above the grills or drip-trays provided,
on one of the 5 shelves available;
failure to do so could damage the oven
enamel.
X
Z
Never cover the walls of the oven with aluminium
foil, especially in the lower part of the cooking
compartment.
X
Z
Any repairs must be carried out by specialised,
licensed personnel. Contact our nearest service
centre and demand only original spare parts.
X
Z
Your FRANKE oven uses a special enamel which
is easy to keep clean, however it is advisable to
clean it frequently to avoid baking on grime and
previous cooking residues.
X
Z
Any self-cleaning panels (if provided) can be
cleaned with soap and water (see cleaning
instructions).
Note:
Before switching the oven on, read the timer
instructions (see page 10).
Summary of Contents for 116.0534.495
Page 2: ... 2 ...
Page 125: ... 125 ...
Page 146: ... 146 A Fig 4 Fig 4a Fig 4b Fig 4c Fig 6 Fig 6a Fig 6b Fig 6c Fig 6d Fig 6e Fig 5 ...
Page 147: ......
