![background image](http://html1.mh-extra.com/html/franke/108-0377-087/108-0377-087_instructions-of-use_2327429009.webp)
9
Starting-up
•
Start up / switch off the hob:
Action
Control panel
Display
To start
press key [
]
[ 0 ] are blinking
To stop
press key [
]
nothing or [ H ]
•
Start up / switch off a heating zone:
Action
Control panel
Display
Zone selection
Press [ 0 ] of the selected zone
[ 0 ] and control light on
To set
Slide on the “SLIDER“
[ 0 ] to [ 9 ]
(adjust the power)
to the right or to the left
To stop
Slide to [ 0 ] on “SLIDER“
[ 0 ] or [ H ]
or press on [ 0 ]
[ 0 ] or [ H ]
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Residual heat indication
After switching off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on don’t touch the heating zones and don’t put any heat
sensitive object on them.
There are risks of burn and fire.
Booster function
The booster function [
] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like nuddles.
•
Start up / Stop the booster function:
Action
Control panel
Display
Zone selection
Press key [ 0 ] from the zone
[ 0 ] and control light on
Start up the Booster
Press key [
]
[ P ] during 5 min
Stop the Booster
Slide on the “SLIDER“
[ P ] to [ 0 ]
Or press [
]
[ 9 ]
Summary of Contents for 108.0377.087
Page 84: ...20725 4...