![background image](http://html1.mh-extra.com/html/franke/108-0377-087/108-0377-087_instructions-of-use_2327429010.webp)
10
•
Power management:
The cooking hob is equipped with two booster functions. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed :
Heating zone selected
The other heating zone:
(example: power level 9)
[ P ] is displayed
[ 9 ] goes to [ 7 ] depending the type of zone
Timer
The timer is able to be used simultaneous with all 3 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time :
Example for 16 minutes at power 7 :
Action
Control panel
Display
Zone selection
press display [ 0 ] selected
[ 0 ] and control light on
Select the power level
slide on
the “SLIDER“ to [ 7 ]
[ 7 ]
Select « Timer »
press display [ CL ]
[ 00 ]
Set the units
slide on the “SLIDER“ to [ 6 ]
[ 0 fixed ] [ 6 blinking ]
Valid the units
press display [ 06 ]
[ 0 blinking ] [ 6 fixed ]
Set the tens
slide on the “SLIDER“ to [ 1 ]
[ 1 blinking ] [ 6 fixed ]
Valid the tens
press display [ 16 ]
[ 16 ]
The time is confirmed and the cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7 :
Action
Control panel
Display
Zone selection
press display [ 0 ] selected
[ 0 ] and control light on
Select « Timer »
press key [ 13 ]
[ 13 ]
Deactivate the units
slide on the “SLIDER“ to [ 0 ]
[ 1 fixed ] [ 0 blinking ]
Valid the units
press display [ 10 ]
[ 1 blinking ] [ 0 fixed ]
Deactivate the tens
slide on the “SLIDER“ to [ 0 ]
[ 0 blinking ] [ 0 fixed ]
Valid the tens
press display [ 00 ]
[ 00 ]
•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].
•
Egg timer function :
Example for 29 minutes :
Action
Control panel
Display
Activate the hob
press display [
]
zone control lights are on
Select« Timer »
press display [ CL ]
[ 00 ]
Set the units
slide on the “SLIDER“ to [ 9 ]
[ 0 fixed ] [ 9 blinking ]
Valid the units
press display [ 09 ]
[ 0 blinking ] [ 9 fixed ]
Set the tens
slide on the “SLIDER“ to [ 2 ]
[ 2 blinking ] [ 9 fixed ]
Valid the tens
press display [ 29 ]
[ 29 ]
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.
Summary of Contents for 108.0377.087
Page 84: ...20725 4...