13
Power limitation configuration
Before you start the procedure :
•
Disconnect the appliance from the electrical network by removing the fuse or turning the
circuit breaker off
•
Reconnect the table to the electrical network.
•
It is necessary to start the procedure within 2 minutes after the connection of the hob to
the electrical network.
•
Do not press the [
] key.
Modification of the limitation of power:
1)
Press the
key n°2
and hold down.
2)
The symbol [ ] will appear on each display
3)
With your other hand, press successively and
quickly (less than 2s) on each [ ] display. Begin
from the front right side and turn contrary clockwise
as described on the picture (a -> b -> c -> d)).
A double "beep" means an error occurred.
If so, start again from item 1).
4
) Remove the fingers of the keys. In the back left display a "C" and a"0" appear flashing
alternately. Meanwhile a standing “0” is displayed in the font left zone.
5
) Select the back left key, then change "C0" in "C1" by means of position of your finger at
the end of the "SLIDER".
6
) Select the front left key.
7
) Program the desired configuration wished by means of the "SLIDER", the beginning to
decrease and the end to increase:
- config 0: 7,1kW
- config 1: 2,9kW
- config 2: 3,7kW
- config 3: 6,0kW
8
) Select
key n°1
during 2s to validate the configuration.
The total power of the hob when delivered is limited to 7100 W.
a
d
c
b
Summary of Contents for 108.0377.087
Page 84: ...20725 4...