FRANCO srl Manual of use and maintenance UCP
4
1.3 Conventions used in this manual
The Manual is divided into autonomous chapters, each of which is addressed to a specific operator figures
(installer, operator and maintenance operator), who have the skills needed to operate the machinery safely.
The chapter order follows the temporal logic of the machine life.
To facilitate the immediate understanding of the text, terms, abbreviations and pictograms, whose meaning is
shown below, are used throughout the manual.
The Instruction Manual consists of a cover, an index and a series of chapters (sections).
The home page lists the machine and model identification data, the revision of the instruction manual, and
finally, a picture of the described machine, drawn in order to facilitate the reader to identify the machine and its
use.
ABBREVIAZIONI
Ch.
= Chapter
Par.
= Paragraph
P.
= Page
Fig.
= Figure
Tab.
= Table
UNITS OF MEASURE
The units of measure used in this manual are those provided by the International System (SI).
1.4 Instruction manual conservation
The instruction manual must be carefully stored and must follow and match the device in all the cases of change
of ownership incurred during the life span of the machine itself.
The manual must be handled with care, with clean hands and placed on clean surfaces. No parts can be
removed, torn or arbitrarily modified.
The manual must be stored in a secure environment, protected from moisture and heat, and near the device to
which it refers. The manufacturer, if requested by the User, may provide additional copies of the
machine’s
instruction manual.
The User can request additional copies of the manual by writing to
.
UPDATING THE MANUAL
The Manufacturer reserves the right to modify the design or specifications of the machine as part of its policy of
improving and enabling them to comply with the statutory or other requirements or standards applicable in any
territory in which its goods are sold, without notifying the Customer and without updating the manuals given to
the user. Moreover, in case of changes (previously agreed between the Customer and the manufacturer) to the
machine installed, which entails a change in one or more chapters of the Instruction manual, the manufacturer
will be responsible for sending the modified chapters (including the new revision) to the User.
The User is responsible, following the directions accompanying the updated documentation, for replacing all the
copies owned, the old chapters with the new ones, the home page, and the index with the new updated version.
The manufacturer shall be responsible for the descriptions included in this manual; in case of any inconsistency
detected in a translated version of the manual (English version), the reader must refer back to the original Italian
version of the manual and, if needed, contact the sales department, who will make necessary changes.
