Rear Flue Exit
- The cut-out in the rear heat shield must be removed in the
case of using the rear flue exit and the heat shield removed
from the back of the stove.
- Open the main door, remove the ceramic log effect kit if
fitted and remove the internal baffle.
- Remove the blanking plate 5 and the clamp 4 from the
back and refit them on the top with the 2 screws and
washers supplied 7, ensuring there is a good seal 2.
- Set the ceramic rope in the groove and fix the flue
collar at rear with 2 bolts and washers supplied.
- Reinstall the internal baffles.
- Replace the rear heat shield.
Flue Exit Direction
–
Savoy Oil Stove
174 07 07
The flue collar/adapter can be fitted to give a rear or top flue exit. If using the top flue exit the blanking plate is not
required.
