Frama Matrix F4 / F6
55
8.6. Modem Setup
Press “Modem Setup” to fetch the menu on the right. Here, you can
adapt the built-in modem to suit your telephone equipment if you
do not obtain a connection with the settings made at the factory.
Before you begin to change the standard settings, you should print
them out. In this respect, please read point 5.5. “Info Print”.
The individual points and their effects are described in detail in the
following.
8.6.1. External Line
When using a franking system conneected with telephone equip-
ment, an exchange code often has to be preselected, e.g. “0” or “9”,
to obtain a free telephone line.
To enter the required exchange code, press “External Line”. At the
same time, this will show your current setting.
Enter the required exchange code and acknowledge your entry by
pressing OK. To delete any wrongly entered or unnecessary exchange
code, press CE and quit the display by pressing ENTER.
8.6.2. Pause
Some not-so-new telephone systems need a little time to send a call-
connected signal to the franking system. Using the function “Pause”,
you can adjust the desired time lag between “Picking up modem”
and dialling the exchange code. This adjustment is carried out as
described in the procedure under point 9.6.1. “External Line”.
8.6.3. Dial Pause
Adjusting the dial pause supports the reliable dialling of telephone
numbers, especially in the case of not-so-new telephone systems.
Using the function “Dial Pause“, you can adjust the desired time lag
between sending the exchange code and dialling the FramaOnline2
telephone number. This adjustment is carried out as described in the
procedure under point 9.6.1. “External Line”.
Summary of Contents for Matrix F4
Page 1: ...Operating Guide IN...