Frama Matrix F4 / F6
15
The following steps assume that you have correctly entered the dialling code (official prefix
for an outside line).
1.
Press “Admin” in the cost centre selec-
tion display.
2.
Enter your PIN for the administration
mode. Then, press the OK key to get in-
to the administration mode.
3.
Press “i”.
4.
Press the “Tool key”.
5.
Press “Forward” (arrow symbol).
6.
Select “FramaOnline2”.
7.
Select “Installation”.
Acknowledge this
by pressing ENTER.
8.
Your Frama Matrix franking system es-
tablishes a link with the FramaOnline2
data centre. This process can take up to
5 minutes. If the link cannot be established, please check the modem settings. In this
respect, please refer to point 8.6.1.
9.
You will now have been logged into the FramaOnline2 data cen-
tre. You will receive a corresponding message in the display.
10.
The display is shown for 8 seconds. After this time, you will find
yourself back in the FramaOnline2 menu.
11.
Press “ESC” twice to go to the Set-up menu 1. Press “Start
up/Log off” to go to cost centre selection.
Summary of Contents for Matrix F4
Page 1: ...Operating Guide IN...