Frama Matrix F4 / F6
20
This is how you should proceed: On the left-hand side of the test
mark, X, look for the line
which seems to be “straightest.
Note the
number beneath it, e.g. “0“.
Use the + and - keys to select the right number in the display and
then press ENTER to go to the Y setting.
Again, but this time for the Y setting, use the + and - keys to select
the right number in the display and then press ENTER.
Once more, as requested, print a test franking mark to check your
settings. The arrows will now point exactly at
the settings you made
,
i.e. right where the lines should be “straightest”.
If results are not satisfactory yet, you can repeat the setting proce-
dure by answering “NO”. To save your settings, confirm with “YES”.
If your franking system has a label dispenser, you can set the label
printout format the same way. Just follow the instructions on the
monitor.
This completes your franking system installation.
Summary of Contents for Matrix F4
Page 1: ...Operating Guide IN...