Frama Matrix F12
12
It is easy enough to install the components yourself. Be sure to observe the safety instructions at all times.
There are four steps to installation:
1. Assembly of the individual components
2. Registering with the FramaOnline2 system
3. Configuring the printer settings
4. Loading postage credit
2.1. General notes and safety information
Select a position near a mains socket and an Ethernet connection for your Frama Matrix F12 franking
system. Avoid direct sunlight and severe vibration.
Draughts can affect the accuracy of the scales.
Your Frama Matrix F12 franking system was manufactured for use in normal conditions. Remember: To-
day’s furniture is coated with a confusing variety of paints, lacquers and synthetic materials. In view of
this, it is quite possible that some of these materials contain constituents which can attack or soften the
plastic feet of our equipment. The feet of our equipment, if affected by foreign substances, can stain your
furniture. Frama is unable to accept any liability in this respect for obvious reasons.
With this in mind, use a non-slip underlay.
2.2. Making connections
The illustration below shows the location of the interfaces and the plug for the plug-in power supply unit
on the rear of the Matrix F12 franking system's housing (connection panel).
Serial port
(RS232 – PC)
Scales port
Communications
module
Socket for PSU
2. Installation