FRAM FMG-MDT2500X, Manual, Page: 19 / 40

18
•
Before you clean the appliance, switch the
appliance off and remove the plug from the
socket. Remove the pusher and the hopper plate
.
Unscrew the fixing ring and remove all parts of the
cutter housing (fig.12). The cutting blade is sharp,
please avoid direct contact with the edge.
•
After pulling out the food tray, as shown by the
arrow pulling the locking handle back to the
starting position, than you can remove the head
tube. (fig.13)
•
Please unplug the plug before cleaning. It cannot
immerse in water, also cannot use faucet to rinse,
use wet cloth to wipe clean only.
•
After all the parts in the meat wring device come
into contact with food, the residual parts of
ground meat can be washed off with water faucet
first, and then soak in warm soapy water or clean water with detergent, can effectively remove the
accessories on the food grease, finally in the faucet rinse.
•
Rinse them with clear hot water and dry them immediately.
•
We advise you to lubricate the cutter unit and the grinding discs with some vegetable oil.
•
The accessories (snail, tray and fixing ring) are not dishwasher safe. The cutting plates and blade can be
put into dishwasher.
6. CLEANING AND MAINTENANCE