FRAM FEM-850BKSS, Manual, Page: 17 / 36

16
Do not take apart the appliance by yourself if the cause of failure is not found, you had better contact
the qualified servicing center.
Symptom Cause Corrections
The metal parts in the tank
have rust. The descaler is not recommended
type. It may corrode the metal
parts in the tank. Use the descaler recommended by
manufacturer.
Water leaks from the
bottom of coffee maker. There is much water in the drip
tray. Please clean the drip tray.
The espresso maker is
malfunction. Please contact with the authorized
service facility for repairing.
Water leaks out of outer
side of filter. There is some coffee powder on
filter edge. Get rid of them.
Acid (vinegar) taste exists
in Espresso coffee. No clean correctly after cleaning
mineral deposits. Clean espresso maker per the
content in “before the first use” for
several times.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad. Please use fresh coffee powder, or
store unused coffee powder in a
cool, dry place. After opening a
package of coffee powder, reseal it
tightly and store it in a refrigerator
to maintain its freshness.
The espresso maker cannot
work any more. The power outlet is not plugged
well. Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please contact
with the authorized service facility
for repairing.
The steam cannot froth. The steam ready indicator is not
illuminated. Only after the steam ready
indicator is illuminated, the steam
can be used to froth.
The container is too big or the
shape is not fit. Use high and narrow cup.
You have used skimmed milk Use whole milk or half-skimmed
milk
7. TROUBLESHOOTING