FRAM FEM-850BKSS, Manual

Page: 16 / 36

15
Note: If you want to make coffee immediately after making steam, coffee indicator will flash green
for alarming upon pressing coffee button, at this time you should turn steam control knob to the
ON position to pump hot water in order to let unit cool down.
➢
AUTOMATIC POWER OFF FUNCTION
Once unit is energized, it will power off automatically after 25 minutes, if you want to continue to
make coffee, need to press power button again to restart unit.
1. Turn off espresso maker and let the espresso maker cool down completely before cleaning.
2. Clean housing of espresso maker with moisture-proof sponge often and clean water tank, drip
tray and removable cup shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for
cleaning.
3. Detach metal funnel by turning it clockwise, get rid of coffee residue inside, then clean it with
cleanser, but at last rinse with clear water.
4. Clean all the attachments in the water and dry them thoroughly.
CLEANING MINERAL DEPOSITS
1. To make sure your espresso maker operates efficiently, internal piping is clean and the flavor of
coffee is optimal, you should clean away the mineral deposits left every 2-3 months.
2. Fill water tank with water and descaler to the MAX level ( the proportion of water and descaler is
4:1, the detail refers to the instruction of descaler. Please use “household descaler”, you can use
the citric acid (obtainable from chemist’s or drug stores) instead of the descaler (the one hundred
parts of water and three parts of citric acid).
3. According to the preheating program, put the metal funnel (without coffee powder in it) and jug
in place. Brew water as per “ PREHEATING”.
4. Press Power button, power indicator will be illuminated, press Coffee button, make sure steam
control knob is in the Off position, when there is water flowing out, press Coffee button to stop
pumping, and wait for a moment, the espresso maker begins to preheat
5. When Coffee button indicator is illuminated, it shows preheating is finished. Press Coffee button
and make two cups of coffee (about 2Oz). press Coffee button to stop pumping.
6. Press Steam button, Coffee button indicator will be extinguished, wait until Steam button
indicator is illuminated. Make steam for 2min by turning steam control knob, then turn steam
control knob to the OFF position to stop making steam. Press Power button to turn off the unit
immediately, make the descaler deposit inside the unit at least 15 minutes.
7. Press Power button to restart unit, wait until Coffee button indicator will be illuminated, then
press Coffee button to brew until no descaler is left.
8. Brew with tap water in the MAX level, repeat steps 4-6 for 3 times, then brew until no water is
left in water tank.
6. CLEANING AND MAINTENANCE