38
WARNING
: Diameter values written on the injector are specified without a comma. For example;
The diameter of 1,70 mm is specified as 170 on the injector.
WARNING
: For the modification to be done by authorized service, this table should be considered.
Manufacturer may not be held responsible for any problems rising because of any faulty modification.
WARNING
: In order to increase the product quality, the technical specifications may be changed without
prior notice.
WARNING
: The values provided with the appliance or its accompanying documents are laboratory readings
in accordance with the respective standards. These values may differ depending on the use and ambient
conditions.
F R A M is a registered trademark of Network One Distribution SRL. Other brands and product
names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from
NETWORK ONE DISTRIBUTION.
Copyright © 2020 Network One Distibution. All rights reserved.
www.framelectrocasnice.ro; www.framappliances.com;
This product is in conformity with norms and standards of European Community
Importer: Network One Distribution
Marcel Iancu Street, 3-5, Bucharest, Romania
Tel: +40 21 211 18 56, www.framelectrocasnice.ro , www.nod.ro
