M.FDKA100.1-03 26/09/2017
M.FDKA100-03 26/09/2017
dr
GRAVITY DRAIN INSTALLATION
Step
1
Level Unit
Step
2
Attach Drain Line
Use adjustable
feet to level unit
Screw female end of drain line
onto Fral drain.
The Fral dehumidifier comes
with a fixed drain outlet
underneath the machine, it is a
standard garden hose
thread" (GHT), which is 3/4"
diameter straight
Run line down to drain,
condensate pump or
sump pump.
Note well: If the machine does not have adjustable feet, check that it is properly leveled.
Step
3
Run Drain Line
Option 1: Gravity Drain Installation
NOTICE:
It is very important to
get a
constant gravity
flow
from the unit to
the condensate pump.
Dehumidifier
Drain Fitting
Level of Dehumidifier Drain Fitting
drain
drain
Make sure no part of
the hose is higher
than the bottom of the
drain fitting.
Note:
The drain elbow
is spot welded to the
base of the unit to
allow proper venting
of drain line.
IMPORTANT:
The drain hose must run downward and stay below
the level of dehumidifier drain fitting.
Option : Gravity Drain Installation
Level of Dehumidifier Drain Fitting
WARNING:
No part of hose can be above level of dehumidifier
drain fitting. Water will not go above this level and will flood the
dehumidifier.
If any water leaks at
this joint, please
check for restrictions
or low spots in drain
line
Dehumidifier
Drain Fitting
Siphon 1
Siphon 2
ain
WARNING:
Double siphon is not allowed because it not allow
correct drainage of water
