2
M.FDK54-05 UK Manual 26/09/2017
1. SAFETY WARNINGS
The FDK54 Series Dehumidifier must always be connected using the grounded electrical connection as
required from all electrical appliances. The warranty is voided and all responsibility for the operation is
born by the owner if non-grounded wiring is utilized.
The FDK54 Dehumidifiers must only be maintained and serviced by a qualified technician.
The FDK54 Dehumidifiers are intended only for operation when oriented with the unit sitting on its feet
and level. Any other orientation could cause water to come in contact with the electrical components.
Remove plug before moving dehumidifier. If any water may have spread throughout unit, the unit should
be opened and allowed to dry thoroughly before reconnected to electric and restarting.
For proper operation, neither the inlet or discharge should be positioned against a wall. The inlet
requires a minimum of 12” clearance and the discharge needs a minimum of 24” clearance.
For proper diffusion of air throughout the room, the dehumidifier should be positioned with the sides
against a wall and the inlet and discharge perpendicular to the wall.
Do not insert any objects into the inlet or discharge. If service is required, call a qualified technician. All
work on unit should be down with the unit “off” and unplugged.
Do not use water to clean unit exterior. Only use a damp cloth with unit unplugged.
Do not use unit as shelf or device to hang clothes. This could cause damage to unit.
The inlet filter generally needs cleaned once per month. Check unit on a weekly basis to ensure that
more frequent cleaning is not required.
Identification:
For future reference, write down the model, serial number, date of purchase and use this information whenever
corresponding concerning your dehumidifier.
Model Number
Serial Number
_
Date of Purchase
_
Warning
115 Volts AC may cause serious injury from electric shock.
1. Disconnect electrical power before servicing
2. Plug unit only into grounded electrical outlet
3. Do not use extension cord
4. Do not use plug adapter
Power Supply:
115V, 60 Hz
AC Only 1 Phase
Outlet Requirement:
3-Prong
Circuit Protector:
Only compressor thermal and overload relay protector
Circuit Breaker
Fuse on PCB supply