Fragram MCOM1256 Manual Download Page 4

 

 

 

KNOW YOUR LINE TRIMMER 

Before attempting to use this product, familiarize yourself with all operating features and safety rules. 

 

ERGONOMIC DESIGN 

The design of the trimmer provides for easy handling. It is designed for comfort and ease of grasp when operating 

in different positions and at different angles. 

 

GRASS DEFLECTOR 

The trimmer includes a grass deflector that helps protect you from flying debris. 

 

TOP-MOUNTED MOTOR 

The top-mounted motor improves balance and is located away from the dust and debris of the cutting area. 

 

 

ASSEMBLY 

 

UNPACKING 

This product requires assembly. 

1. 

Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list 

are included. 

2. 

Inspect the tool carefully to make sure no breakage or damage occurred during shipping. 

3. 

Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. 

 

WARNING: 

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in 

possible serious personal injury. 

WARNING

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration 

or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. 

WARNING:

 

To prevent accidental starting which could cause serious personal injury, always disconnect the plug from the 

power supply. 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for MCOM1256













Reviews: