Controllers and Modifiers
84
THRSHLD -
The threshold level in dB. When the signal crosses this value the sequence is triggered.
Sequencer
The Sequencer generates a sequence of values. When the last stage of the sequence is reached the
sequence starts over. The Sequencer can be used to generate repetitive patterns in time with the beat
of the song.
RATE -
Sets the rate at which the sequence is stepped through. A rate of 1 Hz will cause the
sequencer to step through the stages at a rate of one stage per second.
TEMPO -
Locks the rate to the global tempo. Set to none for manual control of rate, set to the
desired time signature to lock the rate to the current tempo.
RUN -
Starts and stops the sequencer. You can attach a modifier to this to control the sequencer via
any of the available controllers.
STAGES -
Sets the number of stages in the sequence. For example, if
STAGES
is 3, the sequencer
will step through the stages as 1, 2, 3, 1, 2, 3, 1, etc.
STAGEn -
Sets the value at that stage of the sequence.
NOTE: The Sequencer features a random sequence generator. When in the Sequencer menu pressing
ENTER
will load a random set of values into the stages.
Envelope
The Envelope follower follows the envelope of the input signal. The harder you play the greater the
value out of the Envelope follower. The Envelope follower makes possible dynamic parameter
control such as ducking delay or touch-wah.
THRESH -
The threshold level in dB. When the input signal is greater than this value the output of
the follower will track the envelope of the input with a rate set by the attack time. If less than this
value the output will decay at the release rate.
ATTACK -
The rate at which the follower output follows signals increasing in power.
RELEASE -
The rate at which the follower output follows signals decreasing in power.
GAIN -
When using long attack times this can be used to compensate for the lower output level
from the follower.
