90
8 BLOCKS GUIDE
THE MULTIPLEXER BLOCK
MUX
2 Blocks, 4 Channels
Row 1
...
Row 6
In 1
Output
In 4
USB 5/6
USB 7/8
...
Bal.
Level
The Multiplexer block or “MUX” is an input switching powerhouse. It combines all
Axe-Fx III input sources into one block—including two USB options—and can also be
used for on-grid switching between rows.
ă
CONFIG PAGE
Input Select
– This lists all of the possible input sources and selects which one
is active. Only one input can be active at a time. (For multiple inputs, use the Mixer
block.) Signals from Inputs 1–4 and USB 5/6 and 7/8 are present in the Multiplexer
without the corresponding blocks needing to be placed on the grid at all. A modifier
can be attached to the Input Select switch.
This block also has Level, Balance, Bypass, and Bypass Mode parameters.
See
“Common Mix/Level Parameters” on p. 55
.
