94
8 BLOCKS GUIDE
THE REALTIME ANALYZER BLOCK
The Realtime Analyzer block is an animated high-resolution multiband spectrum analyzer with parametric control.
You can “set-it-and-forget-it” or adjust parameters to match your specific needs. You can tap grid signal anywhere
to feed the RTA, allowing you to observe the frequency content.
RTA
1 Block, 0 Channels
ă
CONFIG PAGE
Decay Time
– Sets the decay or release time. The higher this value, the more
slowly each measurement will “fall off” in the display.
Input Select
– Selects how the RTA handles incoming stereo signals. It can
monitor left or right channels individually, or sum them together.
Bands
– Sets the resolution of the display to 32, 64 or 128 bands.
Window Type
– Selects between different window functions to determine how data is displayed.
If you are not familiar with “analyzer windowing”, you easily find more information online.
The RTA block has no channels and cannot be bypassed. Any signal at the block input is passed unmodified to the
block output. In other words, sonically, it behaves exactly as a shunt.
RTA
