107
9 MODIFIERS
TUTORIAL: SCENE CONTROLLERS
In this tutorial, we will set up a Scene Controller to adjust the Input Drive of an Amp block. While it is easy enough
to achieve different amp sounds within a preset simply by switching the channel, this example provides an
excellent and easy way to understand how Scene Controllers work.
We will begin with the Wrecker Rocket preset (#030), though any preset with an amp block could be used. For this
example, we chose an amp model where the Drive parameter setting will be more pronounced, and no pre-existing
scenes are set up.
1. Load the factory preset “#030 Wrecker Rocket.”
2. The first step in using a Scene Controller is to assign it as a Modifier Source to the parameter of your choice.
Enter the Layout grid of the preset, navigate to the Amp block, and press
EDIT
.
3. Use the
PAGE
buttons to locate the Tone page of the Amp block.
4.
NAV
to the Input Drive parameter and notice the open yellow modifier “ring” beneath the knob.
5. With the Input Drive parameter highlighted, press
ENTER
to display the Modifier menu.
6. On the Source page, select Scene Controller 1 . We don’t need any custom settings on the Modify page.
7. Press EXIT to return to the Amp menu. Notice that the open yellow modifier symbol is now a solid yellow dot.
8. Now let’s set the values for our Scene Controller. Press
HOME
to show the home page.
9. Press the CONTROLLERS button (Push-knob D).
10. Use the
PAGE
buttons to locate the Scene Ctrl page of the Controllers menu.
11. Reading down, the Controller 1 column shows eight different values. These will set the value for our target
parameter in each of the eight scenes.
12. We’ll want to change scenes as we dial in these values, so press the MORE 1 of 2 button (Push-knob
E
) to
show the Scene/Channel selectors on the “MORE 2 of 2” strip.
13. Notice the that the current scene is shown at the top of the page. If not, use the scene buttons to select it
now.
14. Dial in the Scene Controller 1 value for Scene 1. Let’s set it to about 20% for a “cleanish breakup” type of
sound. Use your ears!
15. Use the Scene + button (Push-knob B) to switch to Scene 2.
16 . NAV Down to select the Scene 2 row in the Controller 1 column. Turn VALUE to set the value for Scene 2.
Let’s set it to about 45% for a nice crunch. Again, use your ears.
17. Using the process in the previous step, set the value for Scene 3 to 75% and Scene 4 to 100% (or as desired).
18. Press HOME to return to the Home page. Test your first four scenes using the
NAV UP
/
DOWN
buttons.
19. Press
STORE, ENTER, ENTER
to save your work. If desired, enter Scene Names as outlined in
“Saving
Changes” on p. 40
.
20. Feel free to assign other Scene Controllers to other parameters in your preset as desired.
