Transport platform
SEP Serie
SEP u
ser’s manual Page 52 of 89
Doc no. RD-7243-MA-001-02
Figure 31
– Tailgate loading side
Tailgate loading side:
When the machine is lowered to ground level, there is activation of the next floor limit switch detectors
HAUT/HIGH (LS5)
et
BAS/LOW (LS6)
). The machine stops and that automatically locks the loading
tailgate.
∞
R
EFER TO SECTION
ON PAGE
When the lowest floor is reached, observe on the (
CC2
) control box:
•
The white "
HAUT/UP"
button turns off.
•
The white "
BAS/DOWN"
button turns off.
•
The blue "
PROCHAIN ÉTAGE ARRÊT / NEXT FLOOR STOP"
turns off.
•
The yellow «
DÉBARRER PORTE/UNLOCK DOOR
» button lights up, meaning the tailgate is unlocked.
•
The interlock device is then unlocked, and it is possible to to lower the loading tailgate.
•
Pull of the handle to disengage the interlock and completely raise the yellow pivoting railing to lower the
loading tailgate.
•
To shut the tailgate, lower the yellow pivoting railing completely. Pull on the handle to allow the interlock
device to lock.
Note:
when the door is open then closed, the tailgate automatically locks (the platform can be operated
again). On the (
CC2
) control box:
•
The white "
HAUT/UP"
button lights up (if the platform is not at ground level).
•
The white "
BAS/DOWN"
button lights up.
•
The yellow
"DÉBARRER PORTE/UNLOCK DOOR"
button turns off, meaning the door is locked once
again.
Note:
The white "
BAS/DOWN"
and "
HAUT/UP"
buttons of the (
CC2
) control box will not light up if the
ground control mesh door or a landing door is opened and unlocked. If the machine is stopped and the
doors locked, press on the yellow
"DÉBARRER PORTE/UNLOCK DOOR"
button to unlock the doors and
allow them to open.
Completely open
Closing
Completely closed
Pull on the handle
to lock interlock
device
Ground protection mesh
door
(side opposite to wall)
Summary of Contents for SEP-5000
Page 1: ......
