Transport platform
SEP Serie
SEP u
ser’s manual Page 42 of 89
Doc no. RD-7243-MA-001-02
7.5. Platform loading and unloading
•
A protection against falls must be provided at loading points of falling height of 10'-0" (3,0 m)
and more (see local regulation) to prevent persons from falling. (Assemble the landing doors
at access levels/floors).
•
The platform must always be loaded in a way that loading, unloading and unit control access
is clear.
•
The loads must be evenly distributed on the platform.
•
Safely position the load. Any material that may slide or fall must be secured.
7.6. Safety inspection
Before beginning work:
•
Perform a test operation with a load-free platform.
•
Inspect for the presence of obstacles on the trajectory of the platform, on the entire length of
the mast.
•
Remove any trace of ice or snow from the end travel switches (winter and cold climate).
The platform will stop immediately if:
•
An EMERGENCY STOP BUTTON is pressed.
∞
R
EFER TO SECTION
ON PAGE
•
There is an open tailgate.
•
The
"FINAL"
end travel limit switch is activated, at the top or bottom of the mast.
•
The platform has reached the end of the mast.
o
Inductive detector activated.
o
Mechanical detector activated.
•
The buffer detectors are activated.
•
The emergency safety device is activated.
•
There is an open landing door (unlocked).
•
The roof access trap is open (optional roof)
The platform will not start if:
•
There is an overload (flashing indicator light on the control panel of the platform) (
Optional
).
•
There is an open tailgate and its interlock device is not activated.
•
The overspeed detector of the emergency brake is triggered
•
The EMERGENCY STOP BUTTON is activated.
•
There is an open landing door.
•
The roof access trap is open (optional roof)
•
The
"FINAL"
end travel limit switch is activated, at the top or bottom of the mast.
•
The platform has reached the end of the mast.
o
Inductive detector activated.
o
Mechanical detector activated.
•
The buffer detectors are activated.
•
If a power supply malfunction is detected.
A tailgate cannot be opened if:
•
The platform is lowered to ground level or is stationary at an access landing.
Summary of Contents for SEP-5000
Page 1: ......
