20
PROGRAMMING
Programming
– Espresso and Hot Water Volumes
1.
For each drink the volume of espresso can be set within
the programming menu.
NOTE:
Some suggested espresso and hot water volumes can be
found in the appendix of this manual.
2.
Enter the programming mode using the programming key.
3.
The display will read “Programming” when the machine is
in programming mode.
4.
Press and hold the Espresso and Hot Water buttons
together for 10seconds,
until the display reads “Program
within 30 seconds”
5.
Prepare the filter holder, as described on page 3, press
the espresso, button to start brewing a drink
– only the
espresso will be dispensed when in programming mode.
When the desired volume of coffee has been dispensed
press the espresso button again to stop the flow of coffee.
Repeat for the cappuccino, latte and Americano, large
espresso, Large Cappuccino, Large latte and Large
Americano.
NOTE:
It is recommended that fresh coffee is used, for
programming each drink, this helps to program espresso
volumes more accurately.
2.
programming
3.
