Cybercino Users Manual – Draft Edition – 7th
th
January 2009
9
SECTION 03 – Configuration Mode
To enter the configuration mode, press the following buttons:
A.
If the machine is already powered on ...
a.
Press button 01 to power the machine off.
b.
Press and hold button 07 and then simultaneously press button 01.
c.
As the machine starts up it will enter into configuration mode, with “CYBERCINO
CONFIGURATION” displayed on the LCD
d.
The machine can now be configured.
SEQUENCE:
[01]
power the machine off
[07-hold] + [01]
continue to hold until display
confirms configuration mode selected
B.
If the machine is powered off ...
a.
Press and hold button 07 and then simultaneously press button 01.
b.
As the machine starts up it will enter into configuration mode, with “CYBERCINO
CONFIGURATION” displayed on the LCD.
c.
The machine can now be configured.
SEQUENCE:
[07-hold] + [01]
continue to hold until display
confirms configuration mode selected
1.
To configure the grinds volume for a regular shot (puck size for a single shot)
a.
In general configuration mode, press and hold button 02, and then press button 03.
This will enter the grinder configuration mode.
b.
Adjust the grind time using buttons 11 (+) and 10 (-)
c.
Press button 02 to test the grinder at the newly adjusted setting
i.
This grinder setting will be applied to all drinks employing a single shot grind in drink
production.
d.
Press button 07 to store the settings and exit the grinder configuration mode.
SEQUENCE:
[02-hold] + [03]
enter grinder configuration mode
