Cybercino Users Manual – Draft Edition – 7th
th
January 2009
11
d.
The next stage is the water volume. To start the brew press button 04 and allow the
counter to cycle up.
e.
When the correct volume has been reached, press button 04 again.
f.
The setting will be stored. To confirm that this is acceptable, press button 02 to
produce a test black coffee.
g.
Press button 07 to exit black coffee configuration mode.
SEQUENCE:
[04]
to enter black coffee configuration
[04]
step 1, grind time
[04]
step 2, water time start
[04]
step 2, water time stop
[02]
test black coffee
[07]
exit black coffee configuration
4.
To configure a latte
a.
In general configuration mode, press button 05. This will enter the latte
configuration mode.
b.
Press button 05 again to step through the latte configuration. The first stage is the
grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 05 again.
d.
The next stage is the water volume. To start the brew press button 05 and allow the
counter to cycle up.
e.
When the correct volume has been reached, press button 05 again.
f.
The next stage is the milk volume. To start the milk flow press button 05 and allow
the counter to cycle up.
g.
When the correct volume of steamed milk has been reached, press button 05 again.
h.
The settings will be stored. To confirm that this is acceptable, press button 02 to
produce a test latte.
i.
Press button 07 to exit latte configuration mode.
SEQUENCE:
[05]
to enter latte configuration
[05]
step 1, grind time
