Cybercino Users Manual – Draft Edition – 7th
th
January 2009
14
e.
When the correct volume has been reached, press button 05 again.
f.
The next stage is the milk volume. To start the milk flow press button 05 and allow
the counter to cycle up.
g.
When the correct volume of steamed milk has been reached, press button 05 again.
h.
The settings will be stored. To confirm that this is acceptable, press button 02 to
produce a test large latte.
i.
Press button 07 to exit large latte configuration mode.
SEQUENCE:
[08]
to prefix the configuration for large
[05]
to enter large latte configuration
[05]
step 1, grind time
[05]
step 2, water time start
[05]
step 2, water time stop
[05]
step 3, milk time start
[05]
step 3, milk time stop
[02]
test large latte
[07]
exit large latte configuration
8.
To configure a large cappuccino
a.
In general configuration mode, press button 08 followed by button 06. This will
enter the large cappuccino configuration mode.
b.
Press button 06 again to step through the large cappuccino configuration. The first
stage is the grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 06 again.
d.
The next stage is the water volume. To start the brew press button 06 and allow the
counter to cycle up.
e.
When the correct volume has been reached, press button 06 again.
f.
The next stage is the milk volume. To start the milk flow press button 06 and allow
the counter to cycle up.
g.
When the correct volume of foamed milk has been reached, press button 06 again.
