20
WRONG INSTALLATION
Take care to install the detector perpendicularly to the ground.
POWER:
Power 12 Vdc (10 ~ 15 Vdc)
MASK:
Anti-mask output: normally closed
contact in standby.
TAMPER:
24 h Antitamper output.
ALARM:
Alarm output: normally closed relay
in stand by.
Fig. 14
The detector is equipped with special filters for solar
radiation disturbances; as far as possible, installation is
recommended, avoiding direct sunlight.
Fig. 11
ELECTRICAL WIRING
Fig. 13
LED 1 RED
General alarm LED
LED 2 YELLOW
Microwave LED
LED 3 GREEN
LED PIR 1 (upper PIR)
LED 4 GREEN
LED PIR 2 (lower PIR)
LED’s visualization
Fig. 12
