Fracarro 270678, Operating Instructions Manual

Page: 12 / 52

12
ENGLISH
After installing the module attach
it to the mounting rack using the
screws supplied in the accessory
bag. (see Fig 3)
Installation is “plug and play” so
the module is now working.
Insert the modules between the
guides and push them back care-
fully until they are in contact with
the back panel. (see Fig.2)
Stato LED Meaning
Module ON
Green On : the module is operating properly
Off: the module is not supplied.
Flashing : the module has been interrogated by the interconnection module and
is programming.
Laser ON
Green On : the laser is activated and is emitting a luminous radiation.
Off: the laser is not activated; no radiation emits from the module
Over current
Red On: the power that supplies the laser diode is exceeding the limits of proper
working. Contact technical assistance.
Off: no malfunctioning.
Laser temp
Red On: the cooling system of the laser diode is not working properly; the module
performances might have worsened. Contact technical assistance.
Off: no malfunctioning
Board temp
Red On: the module is out of the range of operational temperature. Remove the
cause of overheating or contact technical assistance.
Off: no malfunctioning
Fig. 2
Fig. 3
The modules are installed using the 19” mounting rack fot the Headline range as
shown in the following photos.