23
ENG
L
IS
H
Air filter and housing cleanness check
Only proceed when the engine is not running.
Remove the cover (4) of the air filter after having undone the two
quick release clips (3).
Remove the filter element (5); make sure that dust does not enter
the sleeve during this operation.
Make sure there are no impurities. Otherwise, clean the filter
element according to the instructions provided below.
Blow dehumidified compressed air on the filtering element,
working from the inside outwards (maximum pressure 200 kPa).
Check the condition of the air filter before refitting it. Replace it if
broken or torn.
Check the condition of the gasket at its base.
Some filter systems are fitted with a second filter element (1)
which does not require cleaning.
Position the filter element (5) in its seat.
Refit the cover (4) of the air filter and lock it using the two quick
release clips (3).
Do not use detergents or diesel to clean the air filter.
Never strike the filter element with tools.
The imprecise assembly of the air filter may result in
the intake of unfiltered air and therefore cause serious
damage to the engine.
1
5
2
3
4
17_121_N
