21
ENG
L
IS
H
CHECKS (IN PERIOD OF USE)
Engine lubricant oil level check
The check must be executed when the engine is disconnected and
possibly cool.
Only proceed with the engine stopped and at low temperature, in
order to avoid the risk of burning.
Make sure the generator set is on a flat surface.
Use the oil dipstick to check that the lubricant oil level is between
the "Min" and "Max" limits.
Whether it should be difficult to make the evaluation, proceed
cleaning the oil dipstick using a clean cloth with no rag grinding and
put it back in its slot. Draw it off again and check the level.
If the level is insufficient, it is necessary to top up with lubricant oil
which meets the international standards, as indicated in the
REFILLING table. Remove the lubricant oil cap (1) and pour
engine lubricant oil through the hole.
Use the oil dipstick to check that the lubricant oil level in the oil
sump (2) does not exceed the "Max" limit.
Make sure that the oil dipstick is fully inserted and that
the oil filler cap is fully tightened in a clockwise
direction.
17_061_N
