FPM Agromehanika 627 113C, User Manual And List Of Spare Parts

Page: 5 / 48

FPM AGROMEHANIKA | 5
1.3 Identification plaque
For the purposes of ordering spare parts, as well as for any questions concerning the proper use and maintenance of the product, it is necessary
to state information from the identification plaque. In order for this information to be always easily available to you, we advise you to enter it
into the blanks of the illustration below.
The identification plaque contains the following information:
- In the field marked with “Z” – you will find the number of certificate (document) for safety at work.
- In the field marked with “MASA/WEIGHT” – you will find the product’s weight;
- In the field marked with “GODINA/YEAR” – year of manufacture (last two digits);
- In the field marked with “SERIJA/TYPE” – product label;
- In the field marked with “№” – you will find the product’s serial number composed of nine digits;
NOTE:
USING ORIGINAL SPARE PARTS APPROVED BY FPM AGROMEHANIKA GUARANTEES PROPER FUNCTIONING OF THE MACHINE, AS WELL
AS SATISFACTORY PERFORMANCE. USING SPARE PARTS AND EQUIPMENT NOT APPROVED BY FPM AGROMEHANIKA EXCLUDES ANY LIABILITY
OF THE MANUFACTURER FOR ANY POSSIBLE DAMAGE.
1.4 Limited warranty
I General conditions
The company FPM AGROMEHANIKA A.D. (hereafter FPM) guarantees that the product will function properly for 2 years from the date of the
product’s delivery to the buyer. This warranty covers all parts manufactured by FPM, whose lifetime is longer than two years and which have
been determined to be faulty due to material defects, bad manufacturing, and/or incorrect assembly, by the assessment of FPM or its authorised
service centre.
For buyers in Serbia, FPM provides all rights pursuant to Articles 54 and 55 of the Law on Consumer Protection, and for buyers outside of Serbia,
the rights that are in accordance to that country’s relevant laws shall apply.
II Responsibilities of FPM according to the warranty
FPM has committed itself to replace and repair any defective parts/assemblies during the warranty period free of charge, if that has been caused
by material defects, bad manufacturing, or incorrect assembly. The deadline for removing the fault is up to 45 days from the day of reporting.
The replaced parts are the property of FPM and they are handed over to the authorised serviceperson or distributor.
III Exceptions and limitations
This warranty does not cover:
- parts made of wood;
- parts/assemblies not manufactured by FPM (tyres, plastics, belts, engines, etc.). These items are covered by the warranty of the responsible
manufacturer:
- parts that are normally expended during the product’s use (consumables), as well as lubricants. These parts are specifically listed/labelled in
the user manual for each product;
- regular servicing and maintenance of the product as specified by the user guide.
The warranty does not cover a fault resulting from:
- an act of a higher power (flood, thunder, earthquake, etc.);
- not respecting and observing the instructions set out in the user guide, and relating to proper use, setting, maintenance, servicing, and
storing of the product;
- changes and modifications to the product that are not stipulated by FPM;
- installation of non-original parts, or parts and lubricants that are not approved or recommended by FPM;
- the user’s failure to immediately report a fault or the user’s opposition to an immediate repair;
- unprofessional servicing by the user or an unauthorised service centre.
All expenses of transporting the product or parts to an authorised service centre and back, as well as oil changes are borne by the user.