FPM Agromehanika 627 113C, User Manual And List Of Spare Parts

Page: 4 / 48

4
FOREWORD
IMPORTANT!
This user guide contains detailed information required for the proper use and maintenance of the product.
We are asking you to read it carefully before using the product and to observe the instructions for proper functioning, main-
tenance, and safe use. The instructions will help you get to know all features and characteristics of the product, as well as the
sequence for performing all necessary operation during use.
Failure to observe the recommendations and instruction can lead to damage to the product and to serious injury to the user
and nearby persons.
NOTE:
FPM AGROMEHANIKA IS CONSTANTLY STRIVING TO IMPROVE AND ENHANCE ITS PRODUCTS AND THEREFORE RESERVES THE RIGHT
TO CARRY OUT MODIFICATIONS AND IMPROVEMENTS WHEN NEEDED, WITH NO OBLIGATION TO MODIFY PREVIOUSLY MANUFACTURED OR
SOLD EQUIPMENT.
1. INTRODUCTION
1.1 General information about the product
Disc mowers KC are rear tractor mowers designed for harvesting all types of grasses, forage plants, and road-side surfaces, and for communal
works.
These mowers possess strong cutter bars with serrated transfer and are characterised by high reliability even during intensive use. They are
also suitable for use under difficult working conditions, such as: laid down or tangled grass, wet ground, ground with molehills, ground at an
incline, during moderate rains, or similar.
NOTE:
THE NAMES OF MOWERS, PRODUCTS, AND MACHINES IN THIS MANUAL REFER TO DISC MOWERS.
1.2 Technical characteristics
Type FPM 627.926C FPM 627.927C FPM 627.928C FPM 627.715C FPM 627.113C
Working width (m) 1.6 2.0 2.4 2.8 3.15
Number of discs 4 5 6 7 8
Number of blades per disc 2 2
Linkage at three points at three points
Tractor category I, II I, II
Minimal tractor power -kw(hp) 21(29) 25(34) 31(42) 38(52) 41(56)
Number of tractor shaft revolutions(rpm) 540 540
Number of disc revolutions (rpm) 3030 3030
Maximum tractor working speed (km/h) 16 16
Maximum work output (ha/h) 2.5 3.2 3.8 4.5 5
Cut height (cm) 3-9 3-9
Swath width (m) 1.2 1.4 1.8 2.2 2.5
Cutter bar suspension system hydraulic hydraulic
Required hydraulic connector 1-way valve 1-way valve
Safety mechanism yes (floating lever) yes (floating lever)
Transport position width tractor width+25cm tractor width+25cm
Weight (kg) 366 405 452 530 650
CAUTION
!
THE MANUFACTURER IS NOT RESPONSIBLE FOR THE CONSEQUENCES OF
INCORRECT USE AND/OR DISREGARD OF RECOMMENDATIONS GIVEN IN THESE INSTRU-
CTIONS.