IN 5C08/12/15/18/24.
- 9 -
© Future Products Group
OPERATION
Cabinet Layout
REFRIGERATED CABINETS
-
OPERATION
Tilt or Sliding
Front Doors
The tilt door cabinet has a single front door and two
sliding rear doors, (four on the
2400 cabinet).
The front door is hinged along
the bottom edge, and is opened
by pulling the top edge forward.
When opened, the door is
restrained from falling by wire
cables
, which retract into “pull
boxes” when the door is closed.
The sliding door cabinet has two sliding doors on both
the front and rear of the cabinet, (four on the 2400 cabinet).
All the refrigeration and control equipment is housed in the base of the cabinet.
Square Glass
Cabinets
The square glass cabinet does not have front opening
doors. It has rear sliding doors, similar to the tilt and
sliding door models.
The front of the cabinet is formed entirely from fixed
glass panels, which are square and cemented together.
The shelf lights are the same as those used on the tilt
and sliding door models, but the top light is mounted on
brackets, similar to the shelf brackets.
The control equipment is housed in the base of the
cabinet, which may have either integral or remote
refrigeration equipment.
Lighting
As standard, all cabinets are
fitted with high efficiency LED
lighting strips in the ceiling of
the cabinet, and below each
shelf.
