Part No.26107 Rev J August 2018
- 18 -
Inline 5000 Series Cabinets
Interior
cont.
REFRIGERATED CABINETS - CLEANING
End Glass
The insides of the end glass panels can normally be cleaned after the shelf
trays have been removed.
Only remove the shelf lights and brackets etc. when carrying out longer term
maintenance/cleaning.
Trays, Shelves
& Air Grills
Stainless steel trays, shelves, grills etc. should be cleaned with hot soapy water.
Do not use abrasive pads or cleaners (e.g. Scotchbrite pads or Jif), as these
may damage surfaces.
Warning:
Dishwasher detergents will damage any anodised aluminium parts.
Access to the
Cabinet Base
Cavity
Remove the front ticketing rail from the
deck trays, if fitted.
Lift out the deck trays and sweep out, or
use a vacuum cleaner, to remove any
loose debris.
Unscrew the two knobs,
which secure the base
plates.
Lift up the fan deck.
Lift the cover plate off the
evaporator coil, raising it
to the vertical position, to
disengage it from the
chassis.
Lift the air louvers out.
Caution
The whole of the cabinet interior is now accessible
for cleaning.
To avoid possible damage when replacing fan decks,
be sure that cables are not trapped by metal parts.
Continued on next page
