FP Optimail30, Service Manual

Page: 5 / 19

Mailing system Opti mail 30 – Service documentation
Zac Moody/Andrew Nagel Revision June 2005 optimail30 service mode chapter2 (dealer)
Page
5
FRANCOTYP-POSTALIA
S5: Scale
The internal scale can be calibrated and zeroed.
Option:
Button Name Function
S1 Calibration 10lb weight is required to Calibrate the internal scale
S2 Zero Adjust Zeroes the scale
S6: Consumable Protection
The consumable protection chip of the ink cartridge is tested.
The result will be shown as successful or failed
Option: None
Note: The consumable protection chip not only protects the cartridge but more importantly controls the quality of
imprint.
S7: Sensor test
All sensors on the Opti mail 30 can be tested.
Sensor
Function Symbol
inactive
Symbol
active
End of letter Exit detection
† „
Print start Letter input detection
† „
Cartridge
Cassette door and encoder contact
detection
†
(Door Closed)
„
(Door open)
Roller Pressure roller movement
†
(Roller down)
„
(Roller up)
Option:
Button Name Function
S1 Encoder Test Encoder test – The cassette motor will run briefly ( the cassette must be
installed and the roller must be in the lower position)
S4
Move Roller Roller movement (up/down)