FP myMail Operator'S Manual Download

Page: 66 / 118

mymail Operator Manual

10.12 Changing the phone number of the TELESET data center

The TELESET data center number is stored in your mymail at the factory. Usually
there is no need to change it.

Caution!

Only change the stored number if you have been advised to do so

by FP Mailing Solutions. Any incorrect setting of the telephone number for
the TDC results in non loading of postage.

Select “Menu” in the main menu and
confirm.

Select “Configuration” and confirm.

Select “Telephone number” and confirm.

You see the set telephone number.

Use

to delete the old number.

Abort input:

If you press the

key again after having

deleted all numbers, you leave the input
window without saving. The former num-
ber is retained.

Enter the new telephone number of the
TELESET data center and confirm.

The new telephone number is saved.

Summary of Contents for myMail























































































































Search results

Summary of Contents for myMail

Reviews:

Related manuals for myMail

Brands by name

Popular brands

FP myMail, Operator'S Manual

Search results

Summary of Contents for myMail

Reviews:

Related manuals for myMail

Brands by name

Popular brands