FP myMail, Operator'S Manual

Page: 62 / 118

mymail Operator Manual 62
10.10 Internal modem – setting the outside dialing parameters
The mymail has an integrated analog modem. The correct dialing parameters for your
telephone connection must be set when you want to use the internal modem for
connection to the data center.
The modem configuration is part of the installation routine during commissioning. You
should verify and, if necessary, correct the settings if changes were made to your
telephone system.
For information on how to connect the phone cable please read the
Installation Guide.
Disable the PC connection if you used mailcredit for connection to the data
center before. Read chapter 10.11.
Select “Menu” in the main menu and
confirm.
Select “Configuration” and confirm.
Number for dialing outside line
Select “Dial code” and confirm.
Extension: Enter the number for dialing
the outside line.
To insert a dial pause: press the key
three times in succession. A comma
appears in the display at this point. You
can also enter several commas one after
another for a longer pause.
Direct line: When connected to a direct
line, leave the input box for the dial code
empty.
Confirm the setting.