12
NT401 Oil Service Tool Manual_English_V1.01
4.1 Vehicle Identification
The vehicle identification information presented is provided by the ECM of the vehicle being
tested. Therefore, certain attributes of the test vehicle must be entered into the service tool to
ensure the data displays correctly. The vehicle identification sequence is menu driven, you simply
follow the screen prompts and make a series of choices. Each selection you make advances you
to the next screen. Exact procedures may vary somewhat by vehicle.
To identify a vehicle:
1. Scroll with the arrow keys to highlight Oil Reset from the Application menu and press the
ENTER key to start. If you have the application assigned to one of the function keys at the
bottom of the screen, you can alternatively press the function key to start the application.
Figure 4-1 Sample Application Menu Screen
2. A screen with a list of vehicles displays. Select the vehicle you wish to test and press the
ENTER key.
Figure 4-2 Sample Vehicle Manufacturer Selection Screen
3. On each screen that appears, select the correct option and then press the ENTER key. Do this
until the complete vehicle information is entered and the menu of controller selection displays.
