58
Automotive Diagnostic & TPMS Platform GT75TS User's Manual V1.01
If multiple sensors were detected, will pop up message to remind remove the
excess sensors.
Figure 7- 9 Sample Manual Create Function Screen
7.2.2 Clone by Activation
This function allows user to bypass OBD II and automatically write in the
retrieved original sensor data to the Foxwell sensor T10. It is used after the
original sensor is triggered.
To perform Clone by Activation, user needs active the installed sensor firstly,
if succeed, the sensor ID will display.
Figure 7- 10 Sample Clone by Activation Function Screen
Then put the Foxwell T10 sensor that need to be programmed close to the
device 0-20cm and sensors that not need to be programmed beyond 100cm.
