Foxpro XWave, Instruction Manual

Page: 19 / 64

19
Note : Bluetooth technology as a whole has a limited range. If you move your phone far enough
away from the XWave, you will lose Bluetooth connection. If this happens, you will have to
reconnect your phone to the XWave.
3-10 External Speaker Jacks Specifications
The XWave features two external speaker jacks. These are standard 3.5mm female jacks that
can accept a 3.5mm male plug. When selecting an external speaker to use with the XWave, note
that FOXPRO recommends the use of a speaker with 8Ω Impedance.
FOXPRO carries a variety of external speakers for purchase that can be used with the XWave.
You can view the line of speakers online by visiting www.gofoxpro.com
Connect an external speaker to Your XWave:
1. Make sure that the XWave is powered-off before connecting an external speaker.
2. Connect the plug from the external speaker to either the left or right external speaker
jack.
3. Turn on the XWave and begin playing a sound to hear the external speaker in action.
3-11 Auxiliary Device Jack Specifications
The XWave is equipped with an auxiliary jack labeled “AUX”. This jack is located on the front of
the XWave. The purpose of this jack is to allow for the connection of certain external devices
(such as Jack Predator Decoys) for triggering their action on and off by using the XWave remote
control.
While you may be able to connect other devices to the auxiliary jack beyond Jack Predator
Decoys, there are strict electrical limits involved with this jack. If these limits are exceeded,
damage to your XWave will result. That damage is not covered by warranty.
The electrically inclined will want to know that the jack is connected to the drain of an internal
FET with a maximum current rating of 2A. The tip polarity of the 3.5mm jack is positive, the
sleeve is negative. If the external device is connected with reverse polarity, an internal
production diode within the FET will conduct causing the device to stay on constantly. The
maximum voltage applied to this jack cannot exceed 15VDC.
Instructions for connecting various devices to the auxiliary jack are beyond the scope of this
manual. You are urged to seek help from a knowledgeable professional before connecting any
unapproved devices to the jack. Keep in mind that any damage to the XWave as a result of
improper use of the auxiliary jack is not covered by the warranty, nor will FOXPRO be liable for
damage to any connected devices.