13
Setting the Clock:
1.
Access the Date/Time(r) menu and select “Time”
2.
Use the scroll buttons to set the current time.
3.
Push “Play/Select” to lock it in.
The clock can be displayed in either the standard 12-hour format or 24-hour format (military
time).
Configuring Time Format:
1.
Access the Date/Time(r) menu and select “Time Format”
2.
Use the scroll buttons to select either 12 or 24-hour time format.
3.
Push “Play/Select” to lock in the setting.
The bottom status line of the XWave display can show either the current time or the stand
timer. The stand timer will only be displayed if it is turned on
—
otherwise, the clock will show
the current time.
The XWave remote will keep track of the current date in order to properly render moon phases.
This needs to be setup when you first start using the XWave remote.
IMPORTANT NOTE
The XWave remote control features a moon phase indicator. In order to display the correct
moon phase, it is imperative that you enter the correct date. Otherwise, the displayed
information may not be correct.
Setting the Date:
1.
Access the Date/Time(r) menu and select “Date”
2.
By default, the first option is the month. Use the scroll buttons to select the current
month and then push the “Play/Select” button.
3.
Next you set the day using the same method described above, and then push
“Play/Select”.
4.
Finally, set the year and push “Play/Select” to lock it in.
There are three different date formats that you can choose from depending upon your personal
preference. They are month/day/year, year-month-day, and day.month.year.
Configuring Date Format:
1.
Access the Date/Time(r) menu and se
lect “Date Format”
2.
Use the scroll buttons to cycle through the options.
3.
When your desired date format is shown, push “Play/Select” to lock it in.
Summary of Contents for XWave
